Hobby hand drill
Code: 9289
we have physically in Brno.
throughout the Czech Republic
paints, and equipment
Related products
Product detailed description
Hobby hand drill
Precision hand drill designed to give you absolute control when drilling miniature holes into plastic, resin, and metal without melting the material.
About the product
Every modeler knows the feeling: you try to drill out a barrel with a rotary power tool, and high speeds melt the plastic in seconds, ruining the detail. This manual micro drill brings complete tactile feel back to your hand. No more slipping or ruined parts – thanks to the stable swivel palm rest, you rest the drill comfortably against your palm, smoothly turn the knurled body with your fingers, and drill a precise hole exactly where you need it. Whether reinforcing heavy resin limbs via pin joints, installing magnets for weapon options, or adding realistic depth to gun barrels, this tool is a cornerstone of every clean hobby desk.
Basic workshop tool for conversions and model building, Green Stuff World modeling tools range
Properties
- Free-spinning rear swivel cap for steady palm pressure and smooth drilling without finger fatigue
- Fine grip knurling guarantees a firm hold without slipping, even when working with sweaty fingers
- Universal collet chuck securely and firmly grips even the thinnest micro drill bits without runout
All-metal ergonomic body with non-slip knurling, free-spinning swivel head for smooth one-handed downward pressure, and interchangeable chuck for gripping the finest micro drill bits
Tips and tricks
| Product type | Quick overview |
|---|---|
| Use | Drilling out gun barrels, preparing holes for pinning joints, and detailed modifications of plastic, resin, and metal parts |
| Specific application | Drilling bolter muzzles and cannon barrels without slipping off-center, reinforcing stressed miniature joints with steel wire, fitting small neodymium magnets into model limbs |
| Method and technique | Weapon modifications (drilling out bolter muzzles and cannon barrels) – 0.8 to 1.2 mm drill bit | Pinning stressed limb joints – 1.0 to 1.5 mm drill bit with brass rod | Magnetizing miniatures and swappable weapon options – 2.0 to 3.0 mm drill bit | Riveting and armor detailing – 0.3 to 0.5 mm drill bit |
| Advantages | 100% Tactile control prevents damage to thin plastic walls, friction does not melt material unlike rotary power tools, easy centering and precise hole alignment on the first try |
| What to watch for | Unsuitable for rapid drilling of large series of holes in hard steel materials, requires manual turning and caution when working with micro bits under 0.5 mm due to snapping risk under side pressure |
| Combination | Set of micro drill bits of various diameters, hobby super glue, brass or steel rods for pinning, miniature neodymium magnets |
| Practical tip | Before you start drilling, make a small pilot dimple in the center of the future hole with the tip of a hobby knife – the drill bit will seat immediately, won't slip on smooth plastic, and you'll hit the hole accurately on the first try |
How to use
Loosen the front chuck, insert the required drill bit, and tighten securely. Use the tip of a hobby knife to create a small pilot indentation on the plastic to prevent the tool from slipping. Rest the rounded end cap in the center of your palm, place the bit into the indentation, and gently rotate the body between your thumb and index finger, gradually removing material with minimal downward pressure.
Materials and surfaces
Polystyrene (plastic), resin, white metal, pewter, wood, plaster, and modeling putties
Smooth operation of the swivel palm rest, allowing you to maintain stable pressure and direction while merely rotating the tool body with your fingers
Package contents
| Product type | Package contents |
|---|---|
| Package contents | 1× Green Stuff World precision all-metal hobby hand drill with adjustable chuck |
| Accessories | Set of hobby micro drill bits (0.5–3 mm), brass rods for pinning, neodymium magnets, precision hobby knife for pilot dimples, gel super glue |
Technical information
| Product type | Quick overview |
|---|---|
| Product type | Precision manual micro drill with swivel palm rest |
| Manufacturer | Green Stuff World |
| Volume / size | Length approx. 90 mm, chuck clamping capacity for drill bit diameters from 0.1 mm to 3.0 mm |
| Suitable for | Plastic model kits, wargaming miniatures, resin figures, dioramas, and weapon system modifications |
Video
Additional parameters
| Category: | Drilling and milling |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.045 kg |
| EAN: | 8436554367887 |
Hobby hand drill
Product rating
Be the first who will post an article to this item!