Sada brusných papírů 140x230 mm
Code: DRACO P2075
we have physically in Brno.
throughout the Czech Republic
paints, and equipment
Related products
Product detailed description
Sada brusných papírů 140x230 mm
The Draco P2075 Fine Wet Sandpaper Set offers seven grit sizes ranging from 400 to 3000 for gradual surface smoothing. The 140 × 230 mm sheets are suitable for fine sanding and finishing work in model making.
About the product
The Draco P2075 set is designed for modellers who need to gradually sand and smooth the surfaces of model components. The individual grit sizes allow the sanding intensity to be adjusted according to the current condition of the surface.
The sanding papers are also suitable for wet sanding, where water helps wash away the resulting sanding particles. Gradually progressing to finer grits can reduce the visibility of marks left by previous sanding.
The set contains seven sanding sheets with grit sizes of 400, 800, 1000, 1200, 1500, 2000, and 3000. Each sheet measures 140 × 230 mm.
Draco P2075 – modelling sanding accessories for fine surface preparation and finishing.
Properties
- Seven grit sizes: 400, 800, 1000, 1200, 1500, 2000, and 3000 for gradual refinement of sanded surfaces.
- Wet sanding papers suitable for wet sanding and fine surface finishing.
- Individual sheets measuring 140 × 230 mm can be used whole or cut into smaller pieces.
The set contains 7 fine wet sanding sheets measuring 140 × 230 mm, with grit sizes of 400, 800, 1000, 1200, 1500, 2000, and 3000. They allow both dry and wet sanding and gradual surface smoothing.
Tips and tricks
| Product type | Quick overview |
|---|---|
| Use | Fine sanding, smoothing, and finishing of surfaces during model building and modification. |
| Specific application | Finishing sanded areas, gradually smoothing surfaces, and preparing model components for further finishing work. |
| Method and technique | 400 Grit: initial fine sanding and removal of more noticeable marks left by previous work. 800 grit: smoothing the surface after previous sanding. 1000 grit: fine levelling of the sanded surface. 1200 grit: further refinement of surface marks. 1500 grit: very fine finishing sanding. 2000 grit: smoothing minor marks left by fine sanding. 3000 grit: the finest finishing sanding within the set. |
| Advantages | Seven different grit sizes in one package for progressive sanding and surface smoothing. Wet sanding helps wash away the resulting sanding particles. The 140 × 230 mm sheets can be cut into smaller pieces as needed. |
| What to watch for | Fine grit sizes are not intended for quickly removing large amounts of material. Achieving a finer surface finish is best done by progressing through several grit sizes. Excessive pressure may result in unwanted removal of model details. |
| Combination | Modelling files for initial shaping of components and a model scribing tool for subsequently restoring engraved details. |
| Practical tip | Start with a coarser grit and gradually move to finer ones. During wet sanding, regularly remove sanding residue. |
How to use
1. Select the sandpaper according to the desired fineness of the finish. A lower grit number indicates a coarser abrasive. 2. Depending on the size of the surface being worked on, use the entire sheet or cut off a smaller piece. 3. For wet sanding, moisten the sandpaper and the surface being worked on with water. 4. Sand using even movements and light pressure, regularly removing the resulting sanding particles. 5. For a finer finish, gradually progress to higher grit numbers. 6. After sanding, clean the worked surface to remove any remaining abrasive residue.
Materials and surfaces
Sandpaper designed for wet sanding. The exact composition of the abrasive and backing material is not specified.
Wet sanding papers suitable for wet sanding. Grit range from 400 to 3000 for gradual surface refinement.
Package contents
| Product type | Package contents |
|---|---|
| Package contents | 7× Fine wet sanding sheets measuring 140 × 230 mm: 1× 400 grit 1× 800 grit 1× 1000 grit 1× 1200 grit 1× 1500 grit 1× 2000 grit 1× 3000 grit |
Recommended accessories
Modelling files for initial shaping of components, a sanding block for even sanding of surfaces, and a model scribing tool for restoring panel lines after sanding. Recommended accessories are not included in the package.
Technical information
| Product type | Quick overview |
|---|---|
| Product type | Set of fine wet sanding papers |
| Manufacturer | Draco |
| Volume / size | Sheet dimensions: 140 × 230 mm. Number of sheets: 7 pcs. Grit sizes: 400, 800, 1000, 1200, 1500, 2000, and 3000. |
| Suitable for | Modellers who need to finely sand, smooth, and finish the surfaces of model components. Suitable for gradually refining surfaces and removing minor sanding marks. |
Additional parameters
| Category: | Grinding and filing |
|---|---|
| Warranty: | 2 years |
| EAN: | Draco P2075 |
| Paint accessories: | Nářadí a pomůcky |
| Material of accessories: | Paper and cardboard |
| Use of accessories: | Stavba a úpravy modelů |
Product rating
Be the first who will post an article to this item!